Newtek Kabel
Shielded instrumentation cable
Foil-screened multicore cable that keeps interference off signal lines.
Specification
- Conductor
- Flexible annealed bare copper
- Insulation
- PVC type D
- Screen
- Al-mylar tape with ATC drain wire
- Sheath
- PVC type ST-3
- Voltage grade
- 1100 V
- HSN code
- 8544
Construction
What it is and what it is for
A 1100 V flexible cable with PVC type D insulated cores, laid up and wrapped in an aluminium-mylar screen with an annealed tinned copper drain wire, under a PVC type ST-3 sheath.
The overall screen stops electrical noise from motors, drives and power cables from corrupting the signals inside. Ground the drain wire at one end.
Instrumentation cables with twisted pairs, individual and overall screens, armour, and 225, 650 or 1100 V grades are made to order in 0.5 to 1.5 sq mm, up to 80 pairs, with HR PVC, PE or halogen-free insulation.
- Sensor and transmitter loops
- PLC and drive control signals
- Weighing, metering and data acquisition
- Audio and intercom runs near power cables
Sizes and packing
| Cores | Sizes (sq mm) |
|---|---|
| 2 | 0.5, 0.75, 1.0, 1.5, 2.5, 4.0 |
| 3 | 0.5, 0.75, 1.0, 1.5, 2.5, 4.0 |
| 4 | 0.5, 0.75, 1.0, 1.5, 2.5, 4.0 |
Need shielded instrumentation cable for a project?
Send us the sizes, cores and lengths. We will confirm availability and price.